Complementary equipment

KEY OPERATED SELECTOR SWITCH
MODULAR COLUMNS
WARNING SIGNS
ELECTRIC LOCKING DEVICES

SEL SERIES

A correctly installed system guarantees safety and reliability. The installation must be carried out in conformity with the local standards and regulations in force and it therefore follows that all the components which make up the installation must be of high quality and also conform to these requirements. We advise you therefore to use Cardin electronic appliances to complete your installation.
The Cardin accessories are designed to enhance the performance of our appliances and are made of top quality materials in order to guarantee a long operating life and maintain the aesthetical characteristics throughout time.
All the accessories bearing the Cardin trademark are built specifically for use in automatic opening installations.
Systems such as the safety edges have been tested in order to guarantee ample safety margins in all situations.



Product DescriptionCode
  • INTERNATIONAL WARNING SIGN

    It is good practise to fit warning signs to your automatic installations and these should be placed where they can be easily seen by the public, in the area of the system of automatic operation. One inside the property and one on the public side of the installation.


     INTERNATIONAL WARNING SIGN  /17000010

  • KEY OPERATED SELECTOR SWITCH

    Selector switch for the manual on-site activation of automatic gate and door systems. Container in cast aluminium with a shockproof plastic front piece. Anti-tampering system that is easy to install and easier to use.


    TECHNICAL DATA

    Maximum voltage 30 Vac-dc.

    Maximum current 100 mA. 

    Open-close functions.

    Overall dimensions 35 x 70 x 70


     KEY OPERATED SELECTOR SWITCH  /SELMEC/E1

  • SECTIONAL COLUMNS

    Sectional columns to which all the CDR and SEL products can be fitted. They allow the installation of photoelectric cells and selector switches in the most manageable positions within an automatic installation. Easy to install and weather resistant. The aluminium sectional structure of the columns makes them easy to reinstate after accidental knocks and bangs.


     500mmCOLUMN  SELCT01
    for 1 surface-mounted or embedded photoelectric cell.

     1200mmCOLUMN  SELCL01
    for 2 surface-mounted or embedded photoelectric cells.

     1200mmCOLUMN  SELCLS1
    for a selector switch or keypad.

     METAL FASTENING BASE  XACF1R
    Fastening base for columns SELCT01, SELCL01 and SELCLS1.

  • ELECTRIC LOCK 12 Vac (complete with accessories) for the series BL - HL)

     ELECTRIC LOCKING DEVICE RIGHT  980/XLSE10DX
    with internal/external cylinder.

     ELECTRIC LOCKING DEVICE LEFT  980/XLSE10SX
    with internal/external cylinder.

     ELECTRIC LOCKING DEVICE VERTICAL  980/XLSE10SX
    only external cylinder.

     ELECTRIC LOCKING DEVICE VERTICAL  980/XLSE11C
    with internal/external cylinder.

     LATCH PLATE FOR XLSE10DX  980/XLSE10BB

     LATCH PLATE FOR XLSE10SX  980/XLSE10BBS

     GROUND EMBEDDING PLATE FOR XLSE11  980/XLSE11V

     RAIN PROTECTION COVER FOR XLSE11  980/XLSE11TT

     HORIZONTAL PROTECTION COVER FOR XLSE10DX  980/XLSE10TT

     HORIZONTAL PROTECTION COVER FOR XLSE10SX  980/XLSE10TTS

     ELECTRIC LOCK 12 Vac  980/XLSE12
    rotating locking system without cylinder (European profile).

OVERALL DIMENSIONS

Complementary equipment

MECHANICAL SAFETY EDGE FOR INDUSTRIAL / RESIDENTIAL USE
HIGH PROFILE PASSIVE EDGE
CONDUCTIVE SAFETY EDGE
LOW PROFILE PASSIVE EDGE

MECHANICAL SAFETY EDGE FOR INDUSTRIAL/RESIDENTIAL USE

Mechanical safety edge for industrial/residential use
The mechanical safety edge is used as a safety device in installations with automatic sliding gates with horizontal movement and on other closing device installations (hinged gates, overhead garage doors etc.), where there is a real risk of crushing or trapping. Its operating principle is based on detection (active along the entire length of the safety edge), via the crushing pressure applied by an obstacle or a mass that is located within the operating sphere of the closing device that is fitted with the protection.
The deformation of the rubber profile causes the safety edge to create a contact, which is then sent (by cable or by radio) to a control centre, which in turn activates a STOP command.
The safety edge is made up of a rubber profile with elastic impact absorption and an aluminium profile, which is fixed to the column or the gate and acts as a support for the safety edge.
Operation of the device (in the mechanical trip wire version) is guaranteed by 2 micro-switches. Both of them intervene when the safety edge and/or the pliable end caps are deformed.

High profile passive edge
Although it is not to be considered a safety device due to the absence of an electrical contact, the passive edge has the same dimensions and mechanical protective characteristics as the active safety edge and does supply valid absorption protection against impact.

Conductive safety edge
This is used as a safety device on automation installations for sliding gates with horizontal movement and on other closing device installations (hinged gates, overhead garage doors etc.), where there is a real risk of crushing or trapping. The low profile allows it to be fitted to closing devices where passing room is limited.

Low profile passive edge
The low profile edge, which works as simple impact protection, is suitable for closing devices where passing room is limited.



Product DescriptionCode
  • HIGH PROFILE MECHANICAL SAFETY EDGE FOR INDUSTRIAL/RESIDENTIAL USE

    Profile height 75 mm
    Contact output with N.C./8,2 KΩ resistive load
    Max. detection speed 12 m/min

     MECHANICAL SAFETY EDGE 1,5 m - GREY  950/BS15GR

     MECHANICAL SAFETY EDGE 1,7 m - GREY  950/BS17GR

     MECHANICAL SAFETY EDGE 2 m - GREY  950/BS20GR

     MECHANICAL SAFETY EDGE 2,5 m - GREY  950/BS25GR

     MECHANICAL SAFETY EDGE 3 m - GREY  950/BS30GR

     MECHANICAL SAFETY EDGE 1,5 m - BLACK  950/BS15BL

     MECHANICAL SAFETY EDGE 1,7 m - BLACK  950/BS17BL

     MECHANICAL SAFETY EDGE 2 m - BLACK  950/BS20BL

     MECHANICAL SAFETY EDGE 2,5 m - BLACK  950/BS25BL

     MECHANICAL SAFETY EDGE 3 m - BLACK  950/BS30BL

  • HIGH PROFILE PASSIVE EDGE

     PASSIVE EDGE 1,5 m - BLACK  950/BP15BL

     PASSIVE EDGE 1,7 m - BLACK  950/BP17BL

     PASSIVE EDGE 2 m - BLACK  950/BP20BL

     PASSIVE EDGE 1,5 m - GREY  950/BP15GR

     PASSIVE EDGE 1,7 m - GREY  950/BP17GR

     PASSIVE EDGE 2 m - GREY  950/BP20GR

  • LOW PROFILE CONDUCTIVE SAFETY EDGE

    Profile height 52 mm
    Contact output with 8,2 KΩ resistive load

     CONDUCTIVE SAFETY EDGE 1,5 m - BLACK  950/B1NC15BL

     CONDUCTIVE SAFETY EDGE 1,7 m - BLACK  950/B1NC17BL

     CONDUCTIVE SAFETY EDGE 2 m - BLACK  950/B1NC20BL

     CONDUCTIVE SAFETY EDGE 3 m - BLACK  950/B1NC30BL

  • LOW PROFILE PASSIVE EDGE

     PASSIVE EDGE 3 m - BLACK  950/CPS30BL

     PASSIVE EDGE 4 m - BLACK  950/CPS40BL

     PASSIVE EDGE 5 m - BLACK  950/CPS50BL


Realizzazione Sito Web Agency Attiva.it - Venezia