Chain guided automation for sectional doors


Motor power supply 24 Vdc
Maximum duty cycle 70%
Chain guide in aluminium
Maximum door height 5,7 m
Incorporated electronic programmer

GL SERIES

The fruit of an innovative project Cardin’s chain guided automation is made up of two elements complete in all their parts, which are assembled by simply slotting them together. An efficient and aesthetically designed high performance propulsion unit, featuring new technical solutions, and fitted with all the elements for operation under all working conditions it slots together with an extruded aluminium chain driven transmission.
The motor attachment and chain drive head on the guide are structurally optimised using nylon fibre.
The compact and robust propulsion unit is commanded by state of the art logic based on encoder control, which tracks the movement of the door, and on a self-learning programming procedure.
The unit is fitted with a direct current motor which uses an efficient system of kinematics protected by a special anti drag element that cancels out vibrations and variations in movement that can occur during the work cycle. The automation is fitted with courtesy lights and buffer batteries that guarantee emergency operation during blackouts. The integrated electronic programmer is housed in a protective well that only leaves access to the programming controls, display and circuit protection fuses. A well-ordered and functional wiring system connects the electronics card, along with its integrated battery charger and radio reception parts, to the toroidal transformer and the motor. The carriage slides along the chain guide on specially lubricated castors. The manual release mechanism used to detach the carriage from the chain guide is carried out using a release cord that separates the door from the automation.
The model GL124EBSS is also fitted with a battery charger and NiMH buffer batteries. In the same model gate position is encoder controlled and self-programming thus reducing installation times to a minimum and optimising the programming procedure.
Repositioning takes place automatically whenever foreign objects get in the way of the door as it is moving.
The electronic control unit is completed by the anti-crush and “soft start” and “soft stop” functions and a display that monitors the programming stages and counts the number of manoeuvres carried out by the machine. 
Chain guide to be ordered apart. 
Models with mechanical travel limits are available.



Product DescriptionCode
  • SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24 Vdc MOTOR

    Encoder controlled integral automation fitted with an electronic programmer, a radio receiver card, battery charger and NiMH batteries. 

    Digital work time control. Command inputs: TA, TC and TB. 

    Safety inputs: photocells, safety edge (N.C. contact or 8.2 kΩ). 

    Chain guide to be ordered apart.



    For sectional doors:

    - maximum height 2,7 m with a 3000 mm chain guide

    - maximum height 3,2 m with a 3500 mm chain guide

    - maximum height 4,2 m with a 4500 mm chain guide

    - maximum height 5,7 m with a 6000 mm chain guide


     SELF-PROGRAMMING ELECTROMECHANICAL UNIT WITH A 24 Vdc MOTOR  311/GL124EBSS

  • OPTIONAL SLOT-IN CARD

    Functions:

    - traffic light output for 2 traffic lights (red, green);

    - programmable potential free output, impulsive or continuous (courtesy light 100 W);

    - digital safety edge management input.


     OPTIONAL SLOT-IN CARD  YPR124SCL00

  • ELECTROMECHANICAL UNIT WITH A 24 Vdc MOTOR

    Automation with mechanical travel limits

    Integrated automation fitted with a microprocessor controlled programmer (complete with an S449 “FM” radio frequency decoder) featuring intelligent time control functions, which control the position of the gate with extreme precision. Monitoring the current consumption allows the control of a sophisticated anti-crush safety system and with the “soft start” and “soft stop” functions reduce the stress on the mechanical components

    Thrust/drag chain guide to be ordered apart.



    For sectional doors with a maximum height of 3 m.


     ELECTROMECHANICAL UNIT WITH A 24 Vdc MOTOR  311/GL112409

  • CHAIN GUIDE FOR GL124

     3000 mm CHAIN GUIDE  320/GL124S30

     3500 mm CHAIN GUIDE  320/GL124S35

     4500 mm CHAIN GUIDE  320/GL124S45

     6000 mm CHAIN GUIDE  320/GL124S60

  • ADAPTER

    Allows the chain guided automation to be used on counterbalanced garage doors.


     ADAPTER  316/GL1024AC

  • CHAIN GUIDE FOR GL1124

    Kit for spring loaded/sectional doors with a 3150 mm carriage guide, curved lever and pair of drilled support blades.


     CHAIN GUIDE FOR GL1124  320/GL1124S

  • ADAPTER KIT + GUIDE FOR GL1124

     2100 mm CARRIAGE GUIDE  320/GL1124B

     3150 mm CARRIAGE GUIDE  320/GL1124BB

  • EXTERNAL RELEASE CORD

     2000 mm EXTERNAL RELEASE CORD  316/GL20SB

     4000 mm EXTERNAL RELEASE CORD  316/GL20SB4

TECHNICAL DATA

 SPECIFICHE TECNICHE

 

 GL124

GL1124

 Mains power supply Vac 230 230
 Frequency Hz 50 50
 Electrical input A 0,9 1,28
 Power input W 190 170
 Duty cycle % 70 40
 Drag speed m/min 7 5,4
 Max. travel distance mm 5700 3000
 Operating temperature range °C -20°…+55 -20°…+55
 Protection grade IP 40 40

 MOTOR DATA

 Motor power supply Vdc 24 24
 Maximum power input W 130 110
 Electrical input A 3 3

 INCORPORATED RECEIVER CARD

 Reception frequency MHz 433,92 433,92
 Number of channels N° 4 4
 Number of functions N° 2 1
 Number of stored codes N° 300 300

 BATTERY TYPE

 Model  NiMH -


INSTALLATION EXAMPLE


LEGEND

1 Geared motor + integrated programmer
2 Photoelectric cells
3 Mechanical selector switch
4 Anticrush safety edge
5 Release cord
6 External warning lights
7 External aerial
8 Wall mounted switch TB - TD
9 Shunt box
10 All pole circuit breaker
11 Mains cable 230 Vac
12 Channelling route for low voltage wires

Attention: The drawing is purely indicative and is supplied as a working base from which to choose the Cardin electronic components making up the installation. This drawing therefore does not lay down any obligations regarding the execution of the installation.

Realizzazione Sito Web Agency Attiva.it - Venezia