Automation for sliding gates

Motor power supply 24 Vdc
Maximum gate weight from 400 to 3000 kg
Drag speed from 8 to 9,3 m/min.
Programmer with LCD graphics display and real time clock

SL SERIES

A “complete machine” which contains all the electronic and mechanical components required to manage gate positioning and the safety functions of the installation. Powerful and tireless, controlled by state of the art electronics, SLX1524 is fitted with a powerful direct current motor backed up by a finely tuned double gear kinematic system which reduces the stress on the motor and structure caused by the movement of heavy gates.
Installation is possible on any structure and the unit may be fitted both to the right as well as to the left of the passageway. Models are available for both residential and industrial use.
The use of low voltage motors increase the performance, guarantee high efficiency, long life and silent running.
The integrated programmer allows encoder controlled gate positioning and self-programming thus reducing installation times to a minimum and optimising the programming procedure. Repositioning takes place automatically whenever foreign objects get in the way of the gate as it is moving. The electronic control unit is completed by the anti-crush and “soft start” and “soft stop” functions.
The electronic programmer is factory fitted with a graphic LCD display (128 x 128 pixels) with backlighting in six different languages. The menu allows you to rapidly set the system parameters including: the sequential button mode, automatic reclosing, warning lamp pre-flashing, intermittent warning lamp activation, indicator light and photoelectric cell function setting etc.
The electronics card, thanks to the presence of the real-time clock, allows you to set 10 events (shown on the display) and these events permit you to regulate the opening and closing of the motor at different times during the day within 3 weekly time bands (Mon-Fri, Sat-Sun, Mon-Sun); the events can be enabled or disabled (during holiday periods) either from the menu orby means of a radio channel.



Product DescriptionCode
  • maximum weight 3000 kg Controlled by magnetic encoder

    The automation is made up of an electromechanical unit

    100/SL324EBSB with an in-built:

    - electronic programmer

    - 433 MHz “FM” receiver

    - battery charger 

    - buffer batteries. 

    Gate positioning control is carried out by an encoder with self-learning programming that reduces installation times to a minimum and optimizes programming. The integrated programmer is fitted with an LCD display that monitors the programming stages, counts and displays the number of manoeuvres carried out by the machine and allows rapid function parameter event setting thanks to the presence of the real-time clock. The appliance is fitted with a safe and secure manual release system protected by a robust access door with a personalised key.


     ELECTROMECHANICAL UNIT WITH A 24 Vdc MOTOR  100/SL324EBSB

  • MAXIMUM WEIGHT 1500 kg CONTROLLED BY MAGNETIC ENCODER

    The automation is made up of an electromechanical unit

    100/SL1524SB with an in-built:

    - electronic programmer

    - 433 MHz “FM” receiver

    - battery charger 

    - buffer batteries. 

    Gate positioning control is carried out by an encoder with self-learning programming that reduces installation times to a minimum and optimizes programming. The integrated programmer is fitted with an LCD display that monitors the programming stages, counts and displays the number of manoeuvres carried out by the machine and allows rapid function parameter event setting thanks to the presence of the real-time clock. The appliance is fitted with a safe and secure manual release system with a personalised key.


     ELECTROMECHANICAL UNIT WITH A 24 Vdc MOTOR  100/SL1524SB

  • MAXIMUM WEIGHT 500 kg - (PINION H100) CONTROLLED BY MAGNETIC ENCODER

    The automation is made up of an electromechanical unit

    100/SL524 with an in-built:

    - electronic programmer

    - 433 MHz “FM” receiver

    - removable battery charger 

    - NiMH batteries. 

    Gate positioning control is carried out by an encoder with self-learning programming that reduces installation times to a minimum and optimizes programming. The electronic controller features real time display of the programming stages (shown in six different languages) as well as counting the number of manoeuvres carried out by the appliance, parameter setting and transmitter control management. The appliance is fitted with a safe and secure manual release system with a personalised knob (supplied with the appliance).


     ELECTROMECHANICAL UNIT WITH A 24 Vdc MOTOR  100/SL524CB

     ELECTROMECHANICAL UNIT WITHOUT A BATTERY CHARGER AND BATTERIES  100/SL524

  • MAXIMUM WEIGHT 400 kg - (PINION H100) WITH MECHANICAL TRAVEL LIMITS.

    The automation is made up of an electromechanical unit

    100/SL4024M9 with an in-built:

    - electronic programmer

    - 433 MHz “FM” receiver

    The electronic controller features real time display of the programming stages as well as counting the number of manoeuvres carried out by the appliance. The function parameters are set by protected binary dip-switches directly on the ECU card.

    The appliance is fitted with a safe and secure manual release system with a personalised knob (supplied with the appliance).

    Appliance with mechanical travel limits not predisposed for battery powered operation.


     ELECTROMECHANICAL UNIT WITH A 24 Vdc MOTOR  100/SL4024M9

  • TOOTHED RACK

    in galvanised steel for sliding gates.

    Particularly suited to industrial installations.


     VERSION TO BE SOLDERED  106/SLOAC
    (2 m - 22 mm x 22 mm, m4)

     VERSION WITH FASTENING SLITS  106/SLOAC2
    (1 m - 30 mm x 12 mm, m4)

  • TOOTHED RACK

    in nylon reinforced with glass fibre 

    with a steel core for sliding gates.


     VERSION WITH UPPER FASTENING SLITS  106/CRENY
    (30 mm x 20 mm, M4, 1 m pieces)

       106/CRENY1
    (30 mm x 20 mm, M4, 1 m pieces)

  • SPEED CONTROLLER FOR SLIDING GATES

     SPEED CONTROLLER FOR SLIDING GATES  106/RVS
    The device should be fitted to the toothed rack in alignment with the motor in order torecuperate the correct sliding action of the gate in installations that are slightly inclined.

  • KIT BATTERY CHARGER + NIMH BATTERIES

     KIT BATTERY CHARGER + NIMH BATTERIES  KBNIMH-1
    (Allows the 100/SL524 unit to work during blackouts)

TECHNICAL DATA / OVERALL DIMENSIONS

 GENERAL CHARACTERISTICS

 

 SL324EBSB

SLX1524

SL524CB
SL524 

SL4024M9

 Power supply  Vac  230  230  230  230
 Frequency  Hz  50  50  50  50
 Electrical input  A  1,1  0,9  0,75  0,6
 Power input  W  250  200  170  120
 Duty cycle  %  70  70  70  70
 Drag speed  m/min  8  9,3  9,2  8,5
 Torque max.  Nm  90  74  42  32
 Operating temperature range  °C  -20°…+55  -20°…+55  -20°…+55  -20°…+55
 Protection grade  IP  44  44  44  44

 MOTOR DATA

 Motor power supply  Vdc  24  24  24  24
 Maximum power input  W  160  130  38  38
 Electrical input  A  4,5  3,5  1,8  1,8

 INCORPORATED RECEIVER CARD

 Reception frequency  MHz  433,92  433,92  433,92  433,92
 Number of channels  °N  4  4  4  4
 Number of functions  °N  2 5  2  2
 Number of stored codes  °N  300  300  300  300

 BATTERY TYPE

 Model  -  Pb  Pb  NiMH  -


POSITIONING THE UNIT

INSTALLATION EXAMPLE



LEGEND

1 Geared motor
2 Internal photocells
3 External photocells
4 Safety edge
5 Radiosafe
6 Warning lights
7 Mechanical selector switch
8 External aerial
9 Mains cable 230 Vac
10 All pole circuit breaker
11 Channelling route for low voltage wires

Attention: The drawing is purely indicative and is supplied as a working base from which to choose the Cardin electronic components making up the installation. This drawing therefore does not lay down any obligations regarding the execution of the installation.

Realizzazione Sito Web Agency Attiva.it - Venezia