RADIO CONTROLS

433 MHz “FM” “ROLLING CODE”
2128 CODE COMBINATIONS
RECHARGEABLE Li-Poly BATTERY
AERIAL ANS400

AVAILABLE CHANNELS 1-4
RANGE 100 - 200 m
MOBILE TRANSCEIVER + AERIAL 700 m

MORPHEUS

The system maintains the radio-electric characteristics of the latest generation of Cardin Elettronica appliances whilst sharpening the reception capacity and increasing the number of possible uses thanks to the implementation of the “Transceiver” bidirectional signal exchange. These and other characteristics make “Morpheus Cardin” an excellent system that distinguishes itself in the specialist sector of radio control devices. The fruit of Cardin Elettronica’s experience, and realised following a philosophy of work that sees us continuously occupied in the creation of coherent projects that are aimed at the creation of professional products.
The Morpheus system allows the remote activation of electrical and electronic appliances and sends a reception confirmation signal back to the transceiver. The radio control system consists of one or more mobile transceivers and one or more stationary transceivers, which can be combined to meet the specific needs of the system. The codes in the mobile units are transferred during the memorization stage in to the non-volatile memory of the fixed unit; a maximum of 1000 different codes may be memorized.
The Morpheus system is best used for the activation and deactivation of security systems, the command of automatic opening systems and in all systems which require:
- remote control activation (without wires) using secret codes
- confirmation control of the sent command signal without direct visual contact with the system.
During operation each successful activation will receive a confirmation signal sent from the receiver to the transmitter allowing you to control an operation from a remote location.
The first time the appliance is used it should be completely charged until the green LED lights up.



Product DescriptionCode
  • MOBILE TRANSCEIVER

    Container in shockproof plastic material.

    3,7 V power supply with Li-Poly rechargeable battery.

    Lots of 10 pieces

    Overall dimensions 34 x 72 x 11


     1-CHANNEL MOBILE TRANSCEIVER  MORPH433T1
    (lotti da 10 pezzi)

     2-CHANNEL MOBILE TRANSCEIVER  MORPH433T2
    (Lots of 10 pieces)

     3-CHANNEL MOBILE TRANSCEIVER  MORPH433T3
    (Lots of 10 pieces)

     4-CHANNEL MOBILE TRANSCEIVER  MORPH433T4
    (Lots of 10 pieces)

     4-CHANNEL MOBILE TRANSCEIVER + AERIAL  MORPH433T4A
    (Lots of 5 pieces)

     BATTERY CHARGER KEY  MORPHKEY
    The battery can be recharged by connecting the transmitter to a suitable power pack by means of the battery charger key or to a PC via USB.
    The key also allows the different functions available in the mobile units to be managed via PC through the use of the software MORPHKEYSW, which can be downloaded free of charge from the website web www.cardin.it.

     KIT BATTERY CHARGER + BATTERIES  MORPHKEYCB
    The charger kit consists of:
    - battery charger key MORPHKEY;
    - mains transformer;
    - USB cable.

  • KEYPAD COVERS

     10 2-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX200

     10 4-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX400

  • STATIONARY TRANSCEIVER

     OUTDOOR STATIONARY TRANSCEIVER (12/24 Vac-dc)  MORPH433RC
    All weather box in ABS - IP44
    4-channel transceiver with ON/OFF-impulsive relay settings
    1 relay inserted.
    Possibility of memorising up to 1000 codes.
    Lots of 5 pieces
    Overall dimensions 110 x 110 x 33

    The outdoor (ABS IP55) stationary transceiver is fitted with a
    15-way terminal board and has a 12/24V ac-dc electrical
    connection between binding posts 1-2 and it is possible to
    connect two aerials between binding posts in order to improve
    the signal and consequently the range.
    The outdoor receiver is fitted using “fast-fitting” brackets.
    After connecting the wiring the case should be slid onto the
    bracket therefore fixing it to the wall. If any repair work is
    necessary the case can be easily extracted by pushing upwards
    the action of which will separate it from the bracket.
    The unit can be fitted with up to 4 interchangeable
    relays strips - MCCMORPHM0 The modules are set via dip-switches
    (Dip1=CHA - Dip2=CHB - Dip3=CHC - Dip4=CHD) to the following:
    -Impulsive channel modules=corresponding dip-switch set to ‘OFF’
    -ON/OFF channel modules=corresponding dip-switch set to ‘ON’
    In the impulsive modules the activation time can be set by means of a trimmer from 200 ms to 3 s.

     OUTDOOR STATIONARY TRANSCEIVER (12/24 Vac-dc)  MORPH433AL
    All weather box in ABS - IP44
    The transceiver unit is fitted with four soldered relays
    For every output there is a corresponding input through which
    it is possible to read the (ON/OFF) status of the device connected
    to the respective outputs.
    Possibility of memorising up to 1000 codes.
    Lots of 5 pieces
    Overall dimensions 110 x 110 x 33

     2-CHANNEL MINI STATIONARY TRANSCEIVER (12/24 Vac-dc)  MORPH433RM
    Electronic circuit with a 10-way terminal block; Indoor box IP20.
    ON/OFF-impulsive relay settings.
    Possibility of memorising up to 1000 codes.
    Lots of 5 pieces
    Overall dimensions 95 x 75 x 25

     SLOT-IN STATIONARY TRANSCEIVER CARD (24 Vac-dc)  MORPH433RS
    Transceiver card for direct insertion into a host appliance designed to receive it.
    ON/OFF-impulsive relay settings.
    Possibility of memorising up to 1000 codes.
    Lots of 5 pieces
    Overall dimensions 70 x 52 x 20

     RF MODULE FOR STATIONARY TRANSCEIVERS 433 MHz  YRFMORPH43300
    Superheterodyne in FM with a digital filter.
    RF module without decoder suitable for receiving and transmitting digital signals.
    Voltage: 3 Vdc - Electrical input: 15 mA
    Overall dimensions 40 x 20 x 13

     MULTIPROTOCOL INTERFACE  MORPH433W00
    The interface is able to decode a radio frequency signal coming from a Morpheus transceiver and output a Wiegand/ISO-3554 digital signal, containing the transmitter code, in 13 different formats. It is fitted with a USB for connection to a PC and an input that can be connected to a timer or a switch with the aim of enabling or disabling the interface over different time periods. Rolling Code management with transmitter memorization on the interface.

    TECHNICAL DATA
    Carrier frequency - 433,92 MHz
    Power supply - 12/24 Vac-dc
    Electrical input - 20 mA
    Overall dimensions - 120 x 85 x 20 mm

RADIO CONTROLS

433 MHz “FM” “ROLLING CODE”
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: MEMORIA WIRELESS
AERIAL ANS400

AVAILABLE CHANNELS 1-4
RANGE 100 - 150 m
MORE THAN 4 BILLION PRE-CODED TRANSMITTER CODES

S504

An extremely secure state-of-the-art radio control system with 128 bit cryptography. The system has gathered together a series of specific appliances under a single working protocol aimed at the remote control of automatic and security installations. Solutions for all possible uses: control of automatic installations for gates and doors, the command and control of automatic rolling shutters and sun blinds, the activation of alarm and access control systems as well as the activation of all ON-OFF or timer-controlled systems. Adopting the S504 system doesn’t just offer high levels of efficiency but also provides practicality for the user and an extremely useful and manageable appliance for the installer.

Network connectivity
The S504 range interacts with an evolved system consisting of a Cardin server dedicated to the 3G/WF connection by means of appliances and software for computers and smart phones.

Digital Rolling Code transmitters 128 bit with 2/4 channels
The transmitters, powered by a 3-volt lithium batteries (1 x CR2032) with a range of from 100 to 150 metres, are pre-coded in the factory with a unique identification number printed on the rear so as to allow memorisation in lots on the receiver and can be enabled without the presence of the receivers from a remote location through the use of a second transmitter that has already been memorised in the system. They are fitted with a key-lock function which when selected protects the appliance from any accidental activation and automatic shut down that cuts in after at least twenty seconds of continuous activation in order to reduce battery consumption.

Quartz receivers with the possibility of memorising up to 1000 user codes
The receivers are available in all the classic Cardin versions: outdoor receivers 12-24V. with display, with LCD display and 3G/WF functions in watertight cases IP55, mini receiver units to be installed in appliances which already have a protective casing and slot-in receiver cards for direct insertion into host appliances designed to receive them. A code and memory programming base via USB allows the transmitters to be memorised in blocks and access to the remote memorisation function thanks the to RFID technology fitted into the transmitters.



Product DescriptionCode
  • TRANSMITTERS

    Container in shockproof plastic material.
    3V lithium battery power supply CR2032.
    Overall dimensions 35 x 80 x 11

     2-CHANNEL PRECODED TRANSMITTER  TXQ504C2

     4-CHANNEL PRECODED TRANSMITTER<  TXQ504C4

  • PROGRAMMING BASE

    The USB code and memory programming baseallows the transmitters to be programmed in batches and remote code memorisation and replacement thanks to the RFID technology present in th series S504 transmitters and in the management software CARDINTX_SW.

      CODE AND MEMORY PROGRAMMING BASE VIA USB< /td>  PGBASE500

  • KEYPAD COVERS

     5 2-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX5002

     5 4-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX5004

  • FUNCTIONALITY

  • RECEIVERS

    The receivers are available in all the classic Cardin versions: outdoor receivers 12-24V. with display, with LCD display and 3G/WIFI functions, mini receiver units to be installed in appliances which already have a protective casing and slot-in receiver cards for direct insertion into host appliances designed to receive them.
    - outdoor receiver with LCD display and 3G-WIFI functions,
    - outdoor receivers,
    - outdoor receiver with display,
    - 2-channel mini receiver,
    - 2-channel slot-in receiver cards.

    Ricevitore WITH LCD Display AND 3G/WIFI FUNCTIONS

    Thanks to the inbuilt 2G-3G or WF module, avant-garde software and a highly efficient signal reception apparatus the receiver allows the remote management (without range limits) of all installations that require remote control via radio(automatic entry systems, access control, car-parks etc.). The appliance is ideally suited to multi-user installations(up to 3000 transmitters can be memorised) and ones that require frequent upgrading and modification of the codes. The USB connection, the programming and setting buttons and the efficient display allow the appliance to be easily configured.
    The installation management functions are: transmitter code memorization/ cancellation and programming the function mode for each single output. The receiver can manage up to four programmable channel modules (impulsive/ON-OFF/timer controlled, NO/NC contact type and power on reset). The CARDINTX_SW, software that can be downloaded from the website www.cardin.it allows the stored user codes to be managed by means of one of three possible connection methods: direct via USB cable, using the mobile communications network with a 2G/3G module or using a WF module. One or more outputs can be remotely activated over the phone or via SMS with an installed 2G/3G module or using an App. Four independent inputs are also available which can be used to monitor external appliances the status of which can be obtained from the receiver via SMS or an App.




     2G/3G RECEIVER WITH LCD DISPLAY (12/24 Vac-dc)  RCQ5043G

     WIFI RECEIVER WITH LCD DISPLAY (12/24 Vac-dc)  RCQ504WF


    All weather box in ABS - IP55
    The receiver can be fitted with up to four programmable relay modules
    (impulsive, ON-OFF or timer controlled).
    Possibility of memorising up to 3000 codes
    USB connection and 3G-WIFI module for remote user and activation of the
    output relays.
    Overall dimensions 135 x 175 x 85


     MODEM FOR 2G-3G RECEIVER WITH DISPLAY  MGSMGL611OUSB

    The modem allows the installation to be remotely connected via the software
    CARDINTX_SW supplied with the receiver or downloadable free of charge from the Cardin website.

     OUTDOOR RECEIVER (12/24 Vac-dc)  RCQ504C1

    All weather box in ABS - IP55
    The unit can be fitted with up to four interchangeable relay modules
    MCCMORPHM0, which can be set toON/OFF or impulsive.
    1 relay inserted.
    Possibility of memorising up to 1000 codes.
    Overall dimensions 148 x 118 x 40

     OUTDOOR RECEIVER WITH DISPLAY (12/24 Vac-dc)  RCQ504D1

    All weather box in ABS - IP55
    The unit can be fitted with up to four interchangeable relay modules
    MCCMORPHM0, which can be impulsive, ON-OFF or timer controlled.
    1 relay inserted.
    Possibility of memorising up to 1000 codes.
    Overall dimensions 148 x 118 x 40

     2-CHANNEL MINI RECEIVER (12/24 Vac-dc)  RQM504C2

    Electronic circuit with a 10-way terminal block; Indoor box IP20.
    Fitted with 2 relay channels which can be set to ON/OFF or impulsive.
    Possibilità di memorizzare fino a 1000 codici.
    Overall dimensions 95 x 75 x 25

     2-CHANNEL SLOT-IN RECEIVER CARD (24 Vac-dc)  RSQ504C2

    Receiver card for direct insertion into a host appliance designed to receive it.
    Fitted with 2 relay channels which can be set to ON/OFF or impulsive.
    Possibilità di memorizzare fino a 1000 codici.
    Overall dimensions 70 x 52 x 20

     QUARTZ RECEIVER MODULE 433 MHz  YRF433QFMDG1

    Superheterodyne in FM with a digital filter.
    RF module without decoder suitable for receiving and transmitting digital signals.
    Voltage: 3 Vdc - Electrical input: 15 mA
    Overall dimensions 40 x 20 x 13

RADIO CONTROLS

868 MHz “FM” “ROLLING CODE”
2128 CODE COMBINATIONS
REMOTE TRANSMITTER MEMORISATION
RFID: MEMORIA WIRELESS
AERIAL ANQ800-1

AVAILABLE CHANNELS 1-4
RANGE 100 - 150 m
MORE THAN 4 BILLION PRE-CODED TRANSMITTER CODES

S508

An extremely secure state-of-the-art radio control system with 128 bit cryptography. The system has gathered together a series of specific appliances under a single working protocol aimed at the remote control of automatic and security installations. Solutions for all possible uses: control of automatic installations for gates and doors, the command and control of automatic rolling shutters and sun blinds, the activation of alarm and access control systems as well as the activation of all ON-OFF or timer-controlled systems. Adopting the S508 system doesn’t just offer high levels of efficiency but also provides practicality for the user and an extremely useful and manageable appliance for the installer.

Network connectivity
The S508 range interacts with an evolved system consisting of a Cardin server dedicated to the 3G/WF connection by means of appliances and software for computers and smart phones.

Digital Rolling Code transmitters 128 bit with 2/4 channels
The transmitters, powered by a 3-volt lithium batteries (1 x CR2032) with a range of from 100 to 150 metres, are pre-coded in the factory with a unique identification number printed on the rear so as to allow memorisation in lots on the receiver and can be enabled without the presence of the receivers from a remote location through the use of a second transmitter that has already been memorised in the system. They are fitted with a key-lock function which when selected protects the appliance from any accidental activation and automatic shut down that cuts in after at least twenty seconds of continuous activation in order to reduce battery consumption.

Quartz receivers with the possibility of memorising up to 1000 user codes
The receivers are available in all the classic Cardin versions: outdoor receivers 12-24V. with display, with LCD display and 3G/WF functions in watertight cases IP55, mini receiver units to be installed in appliances which already have a protective casing and slot-in receiver cards for direct insertion into host appliances designed to receive them. A code and memory programming base via USB allows the transmitters to be memorised in blocks and access to the remote memorisation function thanks the to RFID technology fitted into the transmitters.



Product DescriptionCode
  • TRANSMITTERS

    Container in shockproof plastic material.
    3V lithium battery power supply CR2032.
    Overall dimensions 35 x 80 x 11

     2-CHANNEL PRECODED TRANSMITTER  TXQ508C2

     4-CHANNEL PRECODED TRANSMITTER<  TXQ508C4

  • PROGRAMMING BASE

    The USB code and memory programming baseallows the transmitters to be programmed in batches and remote code memorisation and replacement thanks to the RFID technology present in th series S508 transmitters and in the management software CARDINTX_SW.

      CODE AND MEMORY PROGRAMMING BASE VIA USB< /td>  PGBASE500

  • KEYPAD COVERS

     5 2-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX5002

     5 4-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX5004

  • RECEIVERS

    OUTDOOR RECEIVER WITH DISPLAY

    The outdoor receiver (ABS IP55) is fitted with a 12-way terminal board and has a 12/24V ac-dc electrical connection between binding posts 11 and 12. Sul ricevitore in cassetta and it is possible to fit an external antenna ANQ800-1 to improve the siganl.
    The outdoor receiver is fitted directly to the wall using four self.tapping screws M4,8.
    The unit can memorise and cancel each single user individually and can manage up to 1000 user codes in the special memory module which is protected by a plastic case.
    The unit can be fitted with up to 4 interchangeable relays strips - MCCMORPHM0
    The relay modules can be set on the display to the following functions:
    - Impulsive channel mode
    - ON/OFF channel mode
    - Timer controlled channel mode
    The receiver can keep track of the events through a USB connection













     2G/3G RECEIVER WITH LCD DISPLAY (12/24 Vac-dc)  RCQ5083G

     WIFI RECEIVER WITH LCD DISPLAY (12/24 Vac-dc)  RCQ508WF


    All weather box in ABS - IP55
    The receiver can be fitted with up to four programmable relay modules
    (impulsive, ON-OFF or timer controlled).
    Possibility of memorising up to 3000 codes
    USB connection and 3G-WIFI module for remote user and activation of the
    output relays.
    Overall dimensions 135 x 175 x 85


     MODEM FOR 2G-3G RECEIVER WITH DISPLAY  MGSMGL611OUSB

    The modem allows the installation to be remotely connected via the software
    CARDINTX_SW supplied with the receiver or downloadable free of charge from the Cardin website.

     OUTDOOR RECEIVER (12/24 Vac-dc)  RCQ508C1

    All weather box in ABS - IP55
    The unit can be fitted with up to four interchangeable relay modules
    MCCMORPHM0, which can be set toON/OFF or impulsive.
    1 relay inserted.
    Possibility of memorising up to 1000 codes.
    Overall dimensions 148 x 118 x 40

     OUTDOOR RECEIVER WITH DISPLAY (12/24 Vac-dc)  RCQ508D1

    All weather box in ABS - IP55
    The unit can be fitted with up to four interchangeable relay modules
    MCCMORPHM0, which can be impulsive, ON-OFF or timer controlled.
    1 relay inserted.
    Possibility of memorising up to 1000 codes.
    Overall dimensions 148 x 118 x 40

     2-CHANNEL MINI RECEIVER (12/24 Vac-dc)  RQM508C2

    Electronic circuit with a 10-way terminal block; Indoor box IP20.
    Fitted with 2 relay channels which can be set to ON/OFF or impulsive.
    Possibilità di memorizzare fino a 1000 codici.
    Overall dimensions 95 x 75 x 25

     2-CHANNEL SLOT-IN RECEIVER CARD (24 Vac-dc)  RSQ508C2

    Receiver card for direct insertion into a host appliance designed to receive it.
    Fitted with 2 relay channels which can be set to ON/OFF or impulsive.
    Possibilità di memorizzare fino a 1000 codici.
    Overall dimensions 70 x 52 x 20

     QUARTZ RECEIVER MODULE 868 MHz  YRF868QFMDG1

    Superheterodyne in FM with a digital filter.
    RF module without decoder suitable for receiving and transmitting digital signals.
    Voltage: 3 Vdc - Electrical input: 15 mA
    Overall dimensions 40 x 20 x 13

RADIO CONTROLS

433 MHz “FM” “ROLLING CODE”
266 COMBINAZIONI DI CODICE
MEMORIZZAZIONE VIA RADIO
ANTENNA ANS 400
CANALI DISPONIBILI 1-4
PORTATA 100 - 150 m
NUMERO DI CODICI PRECODIFICABILI oltre 268 milioni (228)

S449

An innovative radio control system that has gathered together a series of specific appliances under a single working protocol aimed at the remote control of automatic and security installations.
High-technology appliances, protected by robust and practical containers, easy to install and pleasing on the eye in the usual style of Cardin products.
Solutions for all possible uses: control of automatic installations for gates and doors, the command and control of automatic rolling shutters and sun blinds, the activation of alarm and access control systems as well as the activation of all ON-OFF or TIMER-CONTROLLED systems. Adopting the S449 as a command and control system for remote controlled installations, automatic gates and doors and security systems, doesn’t just offer high levels of efficiency but also provides practicality for the user and an extremely useful and manageable appliance for the installer. A complete and secure system, the best today’s technology has to offer, which has been designed and realised with the quality and attention to detail that only CARDIN products can provide.
The “key” to the system is the “simply unique” set of transmitters, made of anti-scratch, shockproof materials that are compact and easy to use. They are available in the following versions: pocket size with 1-2-3-4 channels and wall mounted with four available functions working from a fixed position. The single button radio controls (1 channel) are suitable for alarm systems and access control. The practical and efficient three button radio controls specially designed to command rolling shutters and sun blinds allow the functions open, close and stop to be immediately identified.
A clip is available allowing the insertion of a transponder into the transmitter unit.



Product DescriptionCode
  • TRANSMITTERS

    Container in shockproof plastic material.

    3V lithium battery power supply CR2032.

    Lots of 10 pieces

    Overall dimensions 34 x 72 x 11


     1-CHANNEL TRANSMITTER  TXQ449100

     2-CHANNEL TRANSMITTER  TXQ449200

     3-CHANNEL TRANSMITTER  TXQ449300

     4-CHANNEL TRANSMITTER  TXQ449400




     2-CHANNEL PRECODED TRANSMITTER *  TXQ4492P0

     4-CHANNEL PRECODED TRANSMITTER *  TXQ4494P0
    * Minimum lots of 500 pieces.


     4-CHANNEL TRANSMITTER  TXQ44940M
    Container in shockproof plastic material.
    3V lithium battery power supply CR2032.
    Wall mounting.

    Lots of 5 pieces
    Overall dimensions 72 x 72 x 15

     NUMERICAL CODE KEYPAD VIA RADIO  SSB-T9K4
    Container in shockproof polycarbonate IP57.
    6 V lithium battery power supply 2 x CR2032 (KITSSB-T9K4-1).

    Number of code available combinations: 1.000.000.
    Possibility of memorising up to 250 user codes.
    Manages up to 4 distinct functions and communicates with all S449 standard receivers.

    Lots of 5 pieces
    Overall dimensions 72 x 115 x 28

  • RECEIVERS

    The receivers are available in all the classic Cardin versions: outdoor receivers 12-24V. with display, with LCD display and 3G-WIFI functions, 230V radio programmers in watertight cases with flip up access covers, multiprotocol interface decoding in indoor boxes, mini receiver units to be installed in appliances which already have a protective casing and slot-in receiver cards for direct insertion into host appliances designed to receive them.
    - outdoor receiver with LCD display and 3G-WIFI functions,
    - outdoor receivers,
    - outdoor receiver with display,
    - outdoor radio programmer,
    - 2-channel mini receiver,
    - 2-channel slot-in receiver cards.

    MINI TWO-CHANNEL RECEIVER

    The mini receiver housed in an indoor container and is fitted with an 10-way terminal board.
    The receiver cards are fitted with two relays the outputs of which are marked CH1 (N.O. contact) and CH2 (N.O./N.C. contact). The relays CH1 and CH2 can be activated by selecting the functions A-B-C-D and made to correspond with the transmitter channels CHA-CHB-CHC-CHD by setting the jumpers situated on the circuit board.
    The memorization via radio function allows extra transmitters to be added to the system without having to access the circuit board but instead by using the MEMO Radio button in a previously memorised transmitter in the vicinity of the receiver.






     2G-3G RECEIVER WITH LCD DISPLAY (12/24 Vac-dc)  RCQ4493G

     WIFI RECEIVER WITH LCD DISPLAY (12/24 Vac-dc)  RCQ449WF

    All weather box in ABS - IP55
    The receiver can be fitted with up to four programmable relay modules (impulsive, ON-OFF or TIMER-CONTROLLED).
    Possibility of memorising up to 3000 codes
    USB connection and GSM-GPRS module for remote user and activation of the output relays.
    Overall dimensions 135 x 175 x 85



     MODEM FOR GSM RECEIVER WITH DISPLAY  MGSMGL611OUSB
    The modem allows the installation to be remotely connected via the software PGM449SW supplied with the receiver or downloadable free of charge from the Cardin website.

     OUTDOOR RECEIVER (12/24 Vac-dc)  RCQ449100
    All weather box in ABS - IP44
    The unit can be fitted with up to four interchangeable relay modulesN.O. or N.C.
    1 relay inserted.
    Possibility of memorising up to 300 codes.
    Lots of 5 pieces
    Overall dimensions 110 x 110 x 33


     OUTDOOR RECEIVER WITH DISPLAY (12/24 Vac-dc)  RCQ449D00
    All weather box in ABS - IP44
    The receiver can be fitted with up to four programmable relay modules (impulsive, ON-OFF or TIMER-CONTROLLED).
    Possibility of memorising up to 1000 codes.
    Lots of 5 pieces
    Overall dimensions 110 x 110 x 33


     2-CHANNEL MINI RECEIVER (12/24 Vac-dc)  RQM449200
    Electronic circuit with a 10-way terminal block; Indoor box IP20.
    Supplied with 2 impulsive relays.
    Possibility of memorising up to 300 codes.
    Lots of 5 pieces
    Overall dimensions 95 x 75 x 25

     2-CHANNEL SLOT-IN RECEIVER CARD (24 Vac-dc)  RSQ449200
    Receiver card for direct insertion into a host appliance designed to receive it.
    Supplied with 2 impulsive relays.
    Possibility of memorising up to 300 codes.
    Lots of 5 pieces
    Overall dimensions 70 x 52 x 20

     QUARTZ RECEIVER MODULE 433 MHz  YRF433QFMDG0
    Superheterodyne in FM with a digital filter.
    RF module without decoder suitable for receiving and transmitting digital signals.
    Voltage: 5 Vdc - Electrical input: 15 mA
    Overall dimensions 40 x 20 x 13

  • RADIOPROGRAMMERS

    All weather box in ABS - IP55

    Power supply 230 Vac.

    Lots of 5 pieces

    Overall dimensions 139 x 115 x 44


     RADIOPROGRAMMERS FOR ROLLING GRILLS (600 W)  RPQ449

    Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 20 transmitters.

     RADIOPROGRAMMER ON/OFF + TIMER (2000 W)  RPQ449IT0
    For specific uses such as the remote control of external (gardens) and internal lighting; the remote control of power sockets. Terminal board connections; sequential command input and a control button that can be linked to a light detection device so making sure that the lights do not switch on during the day.
    Possibility of memorising up to 300 user codes.
    Timer settings: from 1 min. to 9 hrs. 59 min.

     RADIOPROGRAMMERS FOR ROLLING SHUTTERS (400 W)  RPQ449IT0
    Indoor box IP43.
    Power supply 230 Vac.
    Overall dimensions 120 x 85 x 20

    The radio programmer allows the remote control of one single phase motor and finds its best use in the command of automatic rolling shutters. The appliance is designed for the connection of an anemometer.


     RADIOPROGRAMMERS FOR SUN BLINDS AND AWNINGS (450 W)  RP449BNA0
    (special for square tube rollers 40 x 40 mm)
    Indoor box IP20.
    Power supply 230 Vac.
    Overall dimensions 280 x 32 x 32

    The radio programmer allows the remote control of one single phase motor and finds its best use in the command of automatic sun blinds and awnings. The appliance is designed for the connection of an anemometer.



     ANEMOMETER  SW01
    Wind speed sensor (with wall bracket).
    The wind sensor can be used with all electronic devices that feature a potential free “anemometer” contact.

    Overall dimensions 240 x 220 x 71

     HAND-HELD PDA PROGRAMMER  PGM449
    User code programming system that can be interfaced with a personal computer. It allows you to manage transmitter codes in the receivers memory without having to activate the transmitters one by one.
    The transmitters pre-coded in blocks can be memorised rapidly in multi-user systems which require the use of many transmitters. You can manage the replacement of a transmitter lost by the user using remote programming.
    Complete with interface cables, external power unit and CD-ROM software.

    TECHNICAL DATA
    Carrier frequency - 433,92 MHz
    Internal power supply (battery) - 9 Vdc
    External power supply - 12 Vac-dc
    Illuminated background display - 16 caratteri x 4 righe
    Maximum number of reserved KEY449 codes - 2000


     RESERVED CODE PROGRAMMING KEY  KEY449
    KEY449, when connected to the PC management software, expands the work capacity of the palm system by remotely adding one or more transmitters to the system.

     MULTIPROTOCOL INTERFACE  RCQ449W00
    The interface is able to decode a radio frequency signal coming from a Cardin S449 transmitter or via cable from a DKS250T and output a Wiegand/ISO-3554 and RS232 digital signal, containing the transmitter code, in 13 different formats.
    The interface also has an enable contact which can be wired to a timer or a normal switch allowing you to activate or deactivate the interface in different time bands.
    The RS232 serial interface allows you to connect the device to a personal computer using software supplied with the kit. Complete with an interface cable and CD-ROM software.

    TECHNICAL DATA
    Carrier frequency - 433,92 MHz
    Power supply - 12/24 Vac-dc
    Electrical input - 20 mA
    Overall dimensions - 120 x 85 x 20

  • TRANSPONDER CLIP

     10 TRANSPONDER CLIPS (LIGHT GREY)  COVERTP-LG

     10 TRANSPONDER CLIPS (DARK GREY)  COVERTP-DG

  • KEYPAD COVERS

     10 2-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX200

     10 4-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX400

RADIO CONTROLS

868 MHz “FM” “ROLLING CODE”
266 CODE COMBINATIONS
MEMORISATION VIA RADIO
ANTENNA ANQ800-1

AVAILABLE CHANNELS 1-4
RANGE 100 - 150 m
MORE THAN 268 MILLION PRE-CODED TRANSMITTER CODES (228)

S486

An innovative radio control system that has gathered together a series of specific appliances under a single working protocol aimed at the remote control of automatic and security installations.
High-technology appliances, protected by robust and practical containers, easy to install and pleasing on the eye in the usual style of Cardin products. Solutions for all possible uses: control of automatic installations for gates and doors, the command and control of automatic rolling shutters and sun blinds, the activation of alarm and access control systems as well as the activation of all ON-OFF or TIMER-CONTROLLED systems. Adopting the S486 as a command and control system for remote controlled installations, automatic gates and doors and security systems, doesn’t just offer high levels of efficiency but also provides practicality for the user and an extremely useful and manageable appliance for the installer. A complete and secure system, the best today’s technology has to offer, which has been designed and realised with the quality and attention to detail that only CARDIN products can provide.
The “key” to the system is the “simply unique” set of transmitters, made of anti-scratch, shockproof materials that are compact and easy to use. They are available in the following versions: pocket size with 1-2-3-4 channels and wall mounted with four available functions working from a fixed position.
The single button radio controls (1 channel) are suitable for alarm systems and access control. The practical and efficient three button radio controls specially designed to command rolling shutters and sun blinds allow the functions open, close and stop to be immediately identified.
A clip is available allowing the insertion of a transponder into the transmitter unit.



Product DescriptionCode
  • TRANSMITTERS

    Container in shockproof plastic material.

    3V lithium battery power supply CR2032.

    Lots of 10 pieces

    Overall dimensions 34 x 72 x 11


     1-CHANNEL TRANSMITTER  TXQ486100

     2-CHANNEL TRANSMITTER  TXQ486200

     3-CHANNEL TRANSMITTER  TXQ486300

     4-CHANNEL TRANSMITTER  TXQ486400




     2-CHANNEL PRECODED TRANSMITTER *  TXQ4862P0

     4-CHANNEL PRECODED TRANSMITTER *  TXQ4864P0
    * Minimum lots of 500 pieces.


     4-CHANNEL TRANSMITTER  TXQ48640M
    Container in shockproof plastic material.
    3V lithium battery power supply CR2032.
    Wall mounting.

    Lots of 5 pieces
    Overall dimensions 72 x 72 x 15

     NUMERICAL CODE KEYPAD VIA RADIO  SSB-T8K4
    Container in shockproof polycarbonate IP57.
    6 V lithium battery power supply 2 x CR2032 (KITSSB-T9K4-1).

    Number of code available combinations: 1.000.000.
    Possibility of memorising up to 250 user codes.
    Manages up to 4 distinct functions and communicates with all S486 standard receivers.

    Lots of 5 pieces
    Overall dimensions 72 x 115 x 28

  • RECEIVERS

     2G-3G RECEIVER WITH LCD DISPLAY (12/24 Vac-dc)  RCQ4863G

     WIFI RECEIVER WITH LCD DISPLAY (12/24 Vac-dc)  RCQ486WF

    All weather box in ABS - IP55
    The receiver can be fitted with up to four programmable relay modules (impulsive, ON-OFF or TIMER-CONTROLLED).
    Possibility of memorising up to 3000 codes
    USB connection and GSM-GPRS module for remote user and activation of the output relays.
    Overall dimensions 135 x 175 x 85


     MODEM FOR GSM RECEIVER WITH DISPLAY  MGSMGL611OUSB
    The modem allows the installation to be remotely connected via the software PGM449SW supplied with the receiver or downloadable free of charge from the Cardin website.

     OUTDOOR RECEIVER (12/24 Vac-dc)  RCQ486100
    All weather box in ABS - IP44
    The unit can be fitted with up to four interchangeable relay modulesN.O. or N.C.
    1 relay inserted.
    Possibility of memorising up to 300 codes.
    Lots of 5 pieces
    Overall dimensions 110 x 110 x 33


     OUTDOOR RECEIVER WITH DISPLAY (12/24 Vac-dc)  RCQ486D00
    All weather box in ABS - IP44
    The receiver can be fitted with up to four programmable relay modules (impulsive, ON-OFF or TIMER-CONTROLLED).
    Possibility of memorising up to 1000 codes.
    Lots of 5 pieces
    Overall dimensions 110 x 110 x 33


     2-CHANNEL MINI RECEIVER (12/24 Vac-dc)  RQM486200
    Electronic circuit with a 10-way terminal block; Indoor box IP20.
    Supplied with 2 impulsive relays.
    Possibility of memorising up to 300 codes.
    Lots of 5 pieces
    Overall dimensions 95 x 75 x 25

     2-CHANNEL SLOT-IN RECEIVER CARD (24 Vac-dc)  RSQ486200
    Receiver card for direct insertion into a host appliance designed to receive it.
    Supplied with 2 impulsive relays.
    Possibility of memorising up to 300 codes.
    Lots of 5 pieces
    Overall dimensions 70 x 52 x 20

     QUARTZ RECEIVER MODULE 868 MHz  YRF868QFMDG0
    Superheterodyne in FM with a digital filter.
    RF module without decoder suitable for receiving and transmitting digital signals.
    Voltage: 5 Vdc - Electrical input: 15 mA
    Overall dimensions 40 x 20 x 13

  • RADIOPROGRAMMERS

     RADIOPROGRAMMERS FOR ROLLING GRILLS (600 W)  RPQ486
    All weather box in ABS - IP55
    Power supply 230 Vac.
    Lots of 5 pieces
    Overall dimensions 139 x 115 x 44
    Logic integrated into the receiver and output for the control of one motor. Power supply output for a pair of Cardin photoelectric cells. Possibility of memorising up to 20 transmitters.

     HAND-HELD PDA PROGRAMMER  PGM486
    User code programming system that can be interfaced with a personal computer. It allows you to manage transmitter codes in the receivers memory without having to activate the transmitters one by one.
    The transmitters pre-coded in blocks can be memorised rapidly in multi-user systems which require the use of many transmitters. You can manage the replacement of a transmitter lost by the user using remote programming.
    Complete with interface cables, external power unit and CD-ROM software.

    TECHNICAL DATA
    Carrier frequency - 868 MHz
    Internal power supply (battery) - 9 Vdc
    External power supply - 12 Vac-dc
    Illuminated background display - 16 caratteri x 4 righe
    Maximum number of reserved KEY449 codes - 2000


     RESERVED CODE PROGRAMMING KEY  KEY449
    KEY449, when connected to the PC management software, expands the work capacity of the palm system by remotely adding one or more transmitters to the system.

     MULTIPROTOCOL INTERFACE  RCQ486W00
    The interface is able to decode a radio frequency signal coming from a Cardin S486 transmitter or via cable from a DKS250T and output a Wiegand/ISO-3554 and RS232 digital signal, containing the transmitter code, in 13 different formats.
    The interface also has an enable contact which can be wired to a timer or a normal switch allowing you to activate or deactivate the interface in different time bands.
    The RS232 serial interface allows you to connect the device to a personal computer using software supplied with the kit. Complete with an interface cable and CD-ROM software.

    TECHNICAL DATA
    Carrier frequency - 868 MHz
    Power supply - 12/24 Vac-dc
    Electrical input - 20 mA
    Overall dimensions - 120 x 85 x 20

  • TRANSPONDER CLIP

     10 TRANSPONDER CLIPS (LIGHT GREY)  COVERTP-LG

     10 TRANSPONDER CLIPS (DARK GREY)  COVERTP-DG

  • KEYPAD COVERS

     10 2-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX200

     10 4-CHANNEL KEYPAD COVERS WITH 5 DIFFERENT COLOURS  COVERMIX400

RADIO CONTROLS

433 MHz “AM” “ROLLING CODE”
248 CODE COMBINATIONS
MEMORISATION VIA RADIO
AERIAL ANS400

AVAILABLE CHANNELS 1-12
512 MAXIMUM TRANSMITTERS STORED IN THE RECEIVER
TRANSMITTER RANGE 100 - 150 m

S435

Highly reliable radio controls for the remote activation of electric and electronic devices. The great range of available models allow you to solve all possible installation problems whilst simultaneously ensuring maximum security for the user. The employment of up to date technology, the scrupulous attention paid to the selection of the materials and a design which is aimed at maximum efficiency and functionality, even under adverse conditions, have led to the realization of a high product quality level.
Electronic reliability is matched by the ergonomic design of the casing of these transmitters that now accompany the user in every moment of the day.
The S435 radio control allows the remote activation of electrical and electronic appliances with its best use in the following areas: automatic opening systems, alarm installations and in all systems which require remote control activation (without wires) using secret codes. The radio control system consists of one or more transmitters and one or more receivers and using a transmitter it is possible to command up to 12 functions (depending on the model).
A complete and secure system, which has been designed and realised with the quality and attention to detail that only CARDIN products can provide.
ROLLING CODE
The system uses a highly reliable and secure encoding system guaranteed by the use of dynamic codes. The code is changed for each transmission through the use of an encoding algorithm, which only the receiver is able to recognise and therefore decide whether or not the transmitted code corresponds to the original code. The code is generated for each channel in the transmitter using the random arbitrary method with 236 possible combinations.



Product DescriptionCode
  • TRANSMITTERS

     2-CHANNEL TRANSMITTER  TRS435200

     4-CHANNEL TRANSMITTER  TRS435400

     12-CHANNEL TRANSMITTER, 4 BUTTONS WITH A 3-WAY SWITCH  TRS435400
    Container in shockproof plastic material.
    12 V battery power supply type “23A”.
    Lots of 10 pieces
    Overall dimensions 39 x 80 x 12

     TRANSMITTER HOLDER KIT  KIT435CLP
    Consists of a holder + key ring.

     4-CHANNEL TRANSMITTER  TRS43540M
    Container in shockproof plastic material. Wall mounting.
    12 V battery power supply type “23A”.
    Lots of 10 pieces
    Overall dimensions 82 x 82 x 20

  • RECEIVERS

     4-CHANNEL RECEIVER (12/24 Vac-dc)  RCS435128

     4-CHANNEL RECEIVER (230 Vac)  RVS435128
    1 relay inserted.
    All weather box in ABS - IP55.
    Possibility of memorising up to 128 codes.
    Lots of 5 pieces
    Overall dimensions 139 x 115 x 44



     OUTDOOR RECEIVER WITH DISPLAY (12/24 Vac-dc)  RCS435D00
    1 relay inserted
    All weather box in ABS - IP55
    Possibility of memorising up to 512 codes.
    Fitted with a code memory access key.
    Lots of 5 pieces
    Overall dimensions 139 x 115 x 44

    The receiver is housed in an outdoor box in ABS IP55 and is fitted with a 14-way terminal board.
    The fixing of the case is carried out by using “fast-fitting” brackets (fig.8). The bracket should be fixed to the wall using two raw plugs (check that it is square to the wall), the case can be then slid on to the bracket therefore fixing it to the wall. The slot-in circuit located towards the bottom of the case can be easily extracted to facilitate wiring up the device. If any repair work is necessary the case can be easily extracted by pushing upwards the action of which will separate it from the bracket.
    The receiver is designed to control common entry points of up to 512 users with the possibility to memorise and cancel each individual user.
    The generated code is memorised in the receiver via radio. Each code is memorised in a memory location which can be selected on the display. Code memory access can only be gained by inserting the key. During the transfer stage the codes are memorised in a non volatile memory module 24C16 which can be moved to another receiver without having to reprogram it.


     OUTDOOR RADIOPROGRAMMER (230 Vac 400W)  RPS435000
    All weather box in ABS - IP55
    Possibility of memorising up to 24 codes.
    Electronic radio programmer with integrated logic functions on the receiver and an output controlling one motor.
    Lots of 5 pieces
    Overall dimensions 139 x 115 x 44

     2-CHANNEL MINI RECEIVER (12/24 Vac-dc)  RMS435200
    Indoor box IP20.
    Electronic circuit with a 10-way terminal block.
    Possibility of memorising up to 128 codes.
    Lots of 10 pieces
    Overall dimensions 90 x 60 x 20

     2-CHANNEL SLOT-IN RECEIVER CARD (12/24 Vac-dc)  RSS435200
    Receiver card for direct insertion into a host appliance designed to receive it.
    Possibility of memorising up to 128 codes.
    Lots of 10 pieces
    Overall dimensions 83 x 60 x 18

RADIO CONTROLS

27,195 / 30,875* MHz “AM” RANDOM CODE
248 CODE COMBINATIONS
TRANSMITTERS WITH DISPLAY
AVAILABLE CHANNELS 2-100
NUMBER OF AVAILABLE CODE COMBINATIONS 7.000.000
TRANSMITTER RANGE 200 - 300 m

S48

Highly reliable radio controls for the remote activation of electric and electronic devices.
The great range of available models, from the standard 2-4 channel transmitters to the transmitters with display with up to 99 functions, allow you to solve all possible installation problems whilst simultaneously ensuring maximum security for the user.
The use of up to date technology, the scrupulous attention paid to the selection of the materials and a design which is aimed at maximum efficiency and functionality, even under adverse conditions, have led to the realization of a high product quality level. Electronic reliability is matched by the ergonomic design of the casing of these transmitters that now accompany the user in every moment of the day.
Solutions for all possible uses: control of automatic installations for gates and doors, the activation of alarm and access control systems as well as the activation of all ONOFF or TIMER-CONTROLLED systems. Adopting the S48 doesn’t just offer high levels of efficiency but also provides practicality for the user and an extremely useful and manageable appliance for the installer.
When used with an access control system it becomes a personal identification instrument in the control of multi-user public and private sector structures, with one or more automatic entry/exit points (controlling parking lots, factories, hotels, camp sites etc.). When used with the RCQ048W00 receiver that is able to decode an S48 transmitter signal and supply a ISO2/Wiegand code format in output you can obtain the remote detection and eventual enabling of users in a general access control system.
RANDOM CODE
The S48 series uses a “Random” code system. The principle of this code system is based on the generation of a secret random code in the receiver (generated by a random counter) which is then transferred to the transmitter by inserting it into an interface slot on the receiver card. This encoding method offers 7.000.000 user code combinations with the possibility for the transmitter to learn a different code (each one in a separate receiver) for each available channel. During memorisation the codes are transferred into a non volatile memory module which can then be transferred into another receiver, where necessary, without having to reprogram the codes.
* 30,875 MHz bandwidth not permitted according to the harmonised European standards



Product DescriptionCode
  • TRANSMITTERS

    Container in shockproof plastic material.

    12 V battery power supply type “23A”.

    Lots of 10 pieces

    Overall dimensions 40 x 100 x 14


     2-CHANNEL TRANSMITTER  TRQ048200

     4-CHANNEL TRANSMITTER  TRQ048400

  • TRANSMITTERS WITH DISPLAY

    Lots of 1 piece


     8-CHANNEL TRANSMITTER  TRQ048D08

     16-CHANNEL TRANSMITTER  TRQ048D16

     100-CHANNEL TRANSMITTER  TRQ048K10

  • OUTDOOR RECEIVER (12/24 Vac-dc)

    All weather box in ABS - IP55.

    Lots of 5 pieces

    Overall dimensions 139 x 115 x 44


     4-CHANNEL RECEIVER (1 relay inserted)  RCQ048100

     4-CHANNEL RECEIVER (ON-OFF channel memory functions)  RCQ0481MM

     2-CHANNEL MINI RECEIVER (12/24 Vac-dc)  RQM048200
    Indoor box IP20.
    Electronic circuit with an 8-way terminal block.
    Lots of 10 pieces
    Overall dimensions 90 x 60 x 20

     2-CHANNEL SLOT-IN RECEIVER CARD (12/24 Vac-dc)  RSQ048200
    Receiver card for direct insertion into a host appliance designed to receive it.
    Lots of 10 pieces
    Overall dimensions 100 x 52 x 20

     MULTI-FUNCTIONAL RECEIVER (230 Vac)  RZQ048B16
    All weather box in ABS - IP55.
    16-channel multi-functional receiver (requires from 1 to 4 MDC048400 strips)
    Overall dimensions135 x 175 x 85

     STRIP WITH 4 IMPULSIVE RELAYS (FOR S48 16-CHANNEL RECEIVERS)  MDC048400
    The relay remains active while the channel button is kept pressed down.
    Lots of 2 pieces

     QUARTZ RECEIVER WITH WIEGAND / ISO2 OUTPUT  RCQ048W00
    The receiver allows the remote detection and eventual enabling of users in a general access control system. It is able to decode a transmitter model S48 signal and supply a Wiegand/ISO2 code format in output.

    TECHNICAL DATA
    All weather box in ABS - IP55.
    Power supply - 12/24 Vac
    Range - 100-200 m
    Output protocol - Wiegand / ISO-3554
    Overall dimensions - 139 x 115 x 44

RADIO CONTROLS

27,195 MHz “AM”
16.384 PROGRAMMABLE CODES
VIA A 14-WAY BINARY DIP-SWITCH
AVAILABLE CHANNELS 2-8
NUMBER OF AVAILABLE CODE COMBINATIONS 16.384
TRANSMITTER RANGE 100 - 700 m

S38

Highly reliable radio controls for the remote activation of electric and electronic devices.
The great range of models offered by Cardin allows you to solve all possible installation problems whilst simultaneously ensuring maximum security for the user. The employment of up to date technology, the scrupulous attention paid to the selection of the materials and a design which is aimed at maximum efficiency and functionality, even under adverse conditions, have led to the realization of a high product quality level. Electronic reliability is matched by the ergonomic design of the casing of these transmitters that now accompany the user in every moment of the day.
The S38 radio control allows the remote activation of electrical and electronic appliances with its best use in the following areas: automatic opening systems and in all systems which require remote control activation (without wires) using secret codes. The radio control system consists of one or more transmitters and one or more receivers which can be combined to meet the specific needs of the client.
The use of miniaturised transmitters guarantees a range of 150-200 m while the use of pocket transmitters will increase the range to 300-700 m using a tuned Cardin aerial (the range values are calculated in free space with no radio-electric interference). A complete and secure system built using the severity and quality inherent in all Cardin products.
PROGRAMMABLE CODE
The S38 series uses a programming system based on a 14-way binary dip-switch. For 1 to 4 channel receivers, code programming is carried out using a 14-way dip-switch which permits 16.384 combinations. The use of 8-channel transmitters allows you to program 4 and 8-channel receivers by setting the first 13 dips on the dip-switch for a total of 8192 combinations. Programming can be carried out numerous times even after the installation consequently allowing you to guarantee the code secrecy.
* 30,875 MHz bandwidth not permitted according to the harmonised European standards



Product DescriptionCode
  • TRANSMITTERS

    Container in shockproof plastic material.

    9 V dry battery power supply (type “GLF22”)

    Lots of 10 pieces

    Overall dimensions 54 x 108 x 22

     2-CHANNEL TRANSMITTER  TRQ038200

     4-CHANNEL TRANSMITTER  TRQ038400

     8-CHANNEL TRANSMITTER  TRQ038800

  • TRANSMITTERS

    Container in shockproof plastic material.

    12 V battery power supply type “23A”.

    Lots of 10 pieces

    Overall dimensions 35 x 66 x 18


     2-CHANNEL TRANSMITTER  TRQ738200

     4-CHANNEL TRANSMITTER  TRQ738400

  • OUTDOOR RECEIVER 12/24 vac-dc

    All weather box in ABS - IP55.

    Lots of 5 pieces

    Overall dimensions 139 x 115 x 44


      4-CHANNEL OUTDOOR RECEIVER  RCQ03810C
    1 relay inserted.

      8-CHANNEL OUTDOOR RECEIVER  RDQ03880C
    Relays to be ordered apart.

     STRIP CON 2 RELÈ IMPULSIVI (SOLO PER RICEVITORI S38 8 CANALI)  MDC038200
    The relay remains active while the channel button is kept pressed down.
    Lots of 1 piece

  • OUTDOOR RECEIVERS 230 Vac

    All weather box in ABS - IP55.

    Lots of 5 pieces

    Overall dimensions 139 x 115 x 44


     4-CHANNEL OUTDOOR RECEIVER  RCQ038100
    1 relay inserted.
    Particularly indicated for the control of alarm systems and for all installations requiring remote control powered by 230Vac.

     OUTDOOR RADIOPROGRAMMER (350W)  RPQ038
    Radioprogrammer with logic integrated into the receiver and output for the control of one motor.
    Particularly indicated for the control of rolling shutters etc.

  • OUTDOOR RECEIVERS 230 Vac

    All weather box in ABS - IP55.

    Lots of 5 pieces

    Overall dimensions 139 x 115 x 44

     2-CHANNEL MINI RECEIVER  RQM03820C
    Indoor box IP20.
    Electronic circuit with an 8-way terminal block.
    Lots of 10 pieces.
    Overall dimensions 90 x 60 x 20

     2-CHANNEL SLOT-IN RECEIVER CARD  RSQ03820C
    Transceiver card for direct insertion into a host appliance designed to receive it.
    Lots of 10 pieces.
    Overall dimensions 90 x 80 x 20

RADIO CONTROLS

433 MHz “AM”
19.683 PROGRAMMABLE CODES
VIA A 9-WAY TERNARY DIP-SWITCH

AVAILABLE CHANNELS 2-4
NUMBER OF AVAILABLE CODE COMBINATIONS 19.683
TRANSMITTER RANGE 100 m

S476

Highly reliable radio controls for the remote activation of electric and electronic devices. The great range of models offered by Cardin allows you to solve all possible installation problems whilst simultaneously ensuring maximum security for the user. The employment of up to date technology, the scrupulous attention paid to the selection of the materials and a design which is aimed at maximum efficiency and functionality, even under adverse conditions, have led to the realization of a high product quality level. Electronic reliability is matched by the ergonomic design of the casing of these transmitters that now accompany the user in every moment of the day.
The S476 radio control allows the remote activation of electrical and electronic appliances with its best use in the following areas: automatic opening systems and in all systems which require remote control activation (without wires) using secret codes. The radio control system consists of one or more transmitters and one or more receivers which can be combined to meet the specific needs of the client.
Using a transmitter you can control up to four functions in a receiver, that has the same code, even from different locations (multiple receivers).
A complete and secure system, which has been designed and realised with the quality and attention to detail that only Cardin products can provide.

PROGRAMMABLE CODE
The S476 series (with up to 4 channels) uses a programming system based on a 9-way ternary dip-switch, which permits 19.683 code combinations. You need only set the identical code in the transmitter and in the receiver using all 9 of the available dips. Programming can be carried out numerous times even after the installation consequently allowing you to guarantee the code secrecy.
The two button transmitter allows single channel function (“A+A”).



Product DescriptionCode
  • TRANSMITTERS

    Container in shockproof plastic material.

    12 V battery power supply type “23A”.

    Lots of 10 pieces

    Overall dimensions 40 x 75 x 19

     2-CHANNEL TRANSMITTER  TRS476200

     4-CHANNEL TRANSMITTER  TRS476400

  • RECEIVERS

      OUTDOOR RECEIVER (12/24 Vac-dc)  RCS476100
    4-channel receiver with 1 relay inserted.
    All weather box in ABS - IP55.
    Lots of 5 pieces
    Overall dimensions 139 x 115 x 44

      2-CHANNEL MINI RECEIVER (24 Vac-dc)  RMS476200
    Indoor box IP20.
    Electronic circuit with a 10-way terminal block.
    Lots of 10 pieces.
    Overall dimensions 90 x 60 x 20

      2-CHANNEL SLOT-IN RECEIVER CARD (12/24 Vac-dc)  RSS476200
    Transceiver card for direct insertion into a host appliance designed to receive it.
    Lots of 10 pieces.
    Overall dimensions 83 x 60 x 18

RADIO CONTROLS

27,195 MHz “AM”
19.683 PROGRAMMABLE CODES
VIA A 9-WAY TERNARY DIP-SWITCH
AVAILABLE CHANNELS 2-4
NUMBER OF AVAILABLE CODE COMBINATIONS 19.683
TRANSMITTER RANGE 200-300 m

S46

Highly reliable radio controls for the remote activation of electric and electronic devices. The great range of models offered by Cardin allows you to solve all possible installation problems whilst simultaneously ensuring maximum security for the user. The employment of up to date technology, the scrupulous attention paid to the selection of the materials and a design which is aimed at maximum efficiency and functionality, even under adverse conditions, have led to the realization of a high product quality level. Electronic reliability is matched by the ergonomic design of the casing of these transmitters that now accompany the user in every moment of the day.
The S46 radio control allows the remote activation of electrical and electronic appliances with its best use in the following areas: automatic opening systems and in all systems which require remote control activation (without wires) using secret codes. The radio control system consists of one or more transmitters and one or more receivers which can be combined to meet the specific needs of the client.
Using a transmitter you can control up to four functions in a receiver, that has the same code, even from different locations (multiple receivers).
A complete and secure system, which has been designed and realised with the quality and attention to detail that only Cardin products can provide. PROGRAMMABLE CODES
The S46 series (with up to 4 channels) uses a programming system based on a 9-way ternary dip-switch, which permits 19.683 code combinations. You need only set the identical code in the transmitter and in the receiver using all 9 of the available dips. Programming can be carried out numerous times even after the installation consequently allowing you to guarantee the code secrecy.
The two button transmitter allows single channel function (“A+A”).
* 29,875 MHz bandwidth not permitted according to the harmonised European standards



Product DescriptionCode
  • TRANSMITTERS

    Container in shockproof plastic material.

    12 V battery power supply type “23A”.

    Lots of 10 pieces

    Overall dimensions 40 x 75 x 19


     2-CHANNEL TRANSMITTER  TRQ466200

     4-CHANNEL TRANSMITTER  TRQ466400

  • OUTDOOR RECEIVER

    All weather box in ABS - IP55.

    Lots of 5 pieces

    Overall dimensions 139 x 115 x 44


     4-CHANNEL RECEIVER (12/24 Vac-dc)  RCQ04610C
    1 relay inserted

     4-CHANNEL RECEIVER (230 Vac)  RVQ04610C
    1 relay inserted

  • OUTDOOR RADIOPROGRAMMER

    All weather box in ABS - IP55.

    Lots of 5 pieces

    Overall dimensions 139 x 115 x 44


     OUTDOOR RADIOPROGRAMMER (230 Vac - 350W)  RPQ046
    Radioprogrammer with logic integrated into the receiver and output for the control of one motor.
    Particularly indicated for the control of rolling shutters etc.



     2-CHANNEL MINI RECEIVER (12/24 Vac-dc)  RQM04620C
    Indoor box IP20.
    Electronic circuit with an 8-way terminal block.
    Lots of 10 pieces.
    Overall dimensions 90 x 60 x 20

     2-CHANNEL SLOT-IN RECEIVER CARD(12/24 Vac-dc)  RSQ04620C
    Transceiver card for direct insertion into a host appliance designed to receive it.
    Lots of 10 pieces
    Overall dimensions 83 x 60 x 18


Realizzazione Sito Web Agency Attiva.it - Venezia