WIRELESS SAFETY DEVICES

CONFORMS TO THE SAFETY STANDARD EN12978

STATIONARY WIRELESS TRANSCEIVER SAFETY SYSTEM
SAFEDECX4 - 433 MHZ “FM”
SAFEDECX8 - 868 MHZ “FM”

TRANSCEIVER INTERFACE FOR SAFETY EDGES
SAFEPRC4 - 433 MHZ “FM”
SAFEPRC8 - 868 MHZ “FM”

PAIR OF WIRELESS PHOTOELECTRIC CELLS
SAFECDR4 - 433 MHZ “FM”
SAFECDR8 - 868 MHZ “FM”

MAXIMUM RADIO SIGNAL RANGE 30 M
PROTECTION GRADE IP65
OPERATING TEMPERATURE RANGE -20..+55°C

RADIOSHIELD

Safety first, this is our what we have in mind. Guaranteeing safety within a complex system is not to be taken lightly as it is never obtained by chance. Safety must be the point of arrival and to obtain it requires a combination of professionalism, experience and know how. It is for this reason that our know how is dedicated to the creation of professional appliances for specialised installers.
Radioshield is part of this project and it becomes part of a range of appliances all of which are dedicated to the protection of absolutely reliable motorized closing systems constructed in conformity with CLASS3. Appliances that unite maximum detection efficiency and controlled intervention working together under all conditions predictable or unpredictable that could arise during the operation of the system.
Range of products
Radioshield is made up of the following high technology appliances protected by robust and practical containers with an elevated degree of protection against inclement weather:
Stationary transceiver unit
The stationary transceiver is able to manage up to 8 security devices via radio and is fitted with 3 safety outputs NO/8.2kΩ set by jumpers. The semi-transparent cover allows the status of the safety devices and the level of charge in the batteries on the transceiver interface to be controlled visually by means of LEDs. Each radio controlled safety device can be associated with one of the three safety outputs by means of a dip-switch. The 3V Cardin Lithium battery supplied with the appliance is highly reliable under all weather conditions and furnishes a high level of safety and top performance in all environments.
Safety edge transceiver interface
The transceiver interface is wired directly to the safety edge on the moving part of the installation. This is a highly professional appliance categorised as a safety device and used with Cardin safety edges it conforms to the European safety standard EN12978.
Pair of wireless transceiver photoelectric cells
The pair of wireless photoelectric cells can be installed on any surface without wiring. Power is supplied by a solar panel on bright days and by a 3V lithium battery in conditions of insufficient light. The duration of the battery can be optimised by using the energy saving function to set the cut in time and the installation operating distance.
Note:The choice of operating frequency for the safety edge should be made after taking into consideration the operating frequency of the other appliances in the installation.
e.g.If the command appliances work at a frequency of 433 MHz it is good practise to use safety devices that work at a frequency of 868 MHz and vice-versa.



Product DescriptionCode
  • WIRELESS SAFETY SYSTEM FOR SAFETY EDGES

    3V lithium battery power supply.
    Safety edge signal input NC/8.2kΩ
    Maximum radio signal range 30 m
    Container in shockproof plastic material IP65.

     SAFETY EDGE TRANSCEIVER INTERFACE 433 MHZ  SAFEPRC4

     SAFETY EDGE TRANSCEIVER INTERFACE 868 MHZ<  SAFEPRC8

  • WIRELESS SAFETY SYSTEM WITH PHOTOELECTRIC CELLS

    3V lithium battery power supply.
    Maximum radio signal range 30 m
    Infrared range: 12 m under all weather conditions.
    Self-locking adjustable lens which can be rotated horizontally through 90° and vertically through plus or minus 30° with respect to the standard installation position. These adjustments permit lateral fitting and installations where the transmitter and receiver are at different heights.

     PAIR OF WIRELESS PHOTOELECTRIC CELLS 433 MHZ  SAFECDR4

     ;PAIR OF WIRELESS PHOTOELECTRIC CELLS 433 MHZ<  SAFECDR8

  • STATIONARY TRANSCEIVER UNIT FOR WIRELESS SAFETY SYSTEMS “ROLLING CODE”

    Power supply 12/24Vac-dc
    Maximum radio signal range 30 m
    8 safety devices
    3 safety outputs NC/8.2kΩ
    Container in shockproof plastic material IP65.

      STATIONARY TRANSCEIVER UNIT 433 MHz  SAFEDECX4

      STATIONARY TRANSCEIVER UNIT 868 MHz;  SAFEDECX8

      KIT SAFETY EDGE INTERFACE + STATIONARY UNIT 433 MHz  SAFEKIT4

     KIT SAFETY EDGE INTERFACE + STATIONARY UNIT 868 MHz  SAFEKIT8

      KIT PAIR OF PHOTOELECTRIC CELLS + STATIONARY UNIT 433 MHz  SAFEKITCDR4

      KIT PAIR OF PHOTOELECTRIC CELLS + STATIONARY UNIT 868 MHz  SAFEKITCDR8

  • 3V-LITHIUM BATTERY PACK

     3V-LITHIUM BATTERY PACK  ZRA3.0-3.8-W


Realizzazione Sito Web Agency Attiva.it - Venezia